|
| Bale Width | 1.20 m | | Bale Diameter | 1.25 m | | Chamber Type | Fixed Chamber | | Feeding | Rotary Cutter |
DETAIL The Roll-Bar™ system, rely on it
Whatever the model or specification of the Roll-Bar™ Baler, rotation bars, which become embedded in the bale, ensure positive turning. This allows the rolling of any crop, whatever its condition, whatever the bale density required. Perfect bale shape
A heavy-duty floor roll provides a sure start for the bale, supporting it and ensuring excellent appearance with good weathering characteristics by gentle but firm rotation during the formation process. The core of the bale is softer than the outside for good aeration. Leading ability. A PROVEN CONCEPT WITH GREAT FEATURES  High field capacity
The New Holland Roll-Bar™ Baler Model BR6090 has a 2 metre wide pick-up with all the characteristics that provide a high operating speed. Two sturdy pick-up wheels ensure excellent ground following and the hydraulic pick-up lift increases manoeuvrability for high daily output.
Powerful bale formation
Premier bale formation in all crops is ensured by a floor roll and a starter roller, together with high tensile steel bale rotation bars. This all results in early core formation and positive rolling action in all crops and conditions.
Quality Bales
The positive start to bale formation permits the complete unrolling of the bale. Chop length can be adjusted by selecting fifteen, seven or eight CropCutter™ knives. Hard faced knives are available for more bales between each sharpening.
Easy material distribution, high quality silage
When fitted with the CropCutter™, the Model BR6090 can operate with up to fifteen knives engaged in the feeder system. Cutting the incoming crop will increase the bale density and the silage quality. For bedding applications the cut material will be more evenly distributed. POSITIVE FEEDING WITH EFFICIENT CUTTING AND HIGH CAPACITY ROLLING Increased output in high volume crops
Closely spaced curved tines, wide pneumatic gauge wheels and a very efficient pick-up flotation system contribute to the Super Sweep™ pick-up action. The standard plate and tine windguard can be fitted with an optional feed roller kit. The roller improves crop transfer in high volume crops and helps make the crop layers more even so has a positive influence on the baler’s overall performance.  Ready for strong storage
The 2.00m wide pick-up on the BR6090 can tackle the widest windrows and makes “weaving” almost unnecessary, so reducing operator fatigue. This results in equal filling of the bale for more uniform density and increased stability-even over longer storage periods.
Improved silage quality
The 1.40m wide cutting rotor with fifteen three-lobe double fingers positively transfers the crop to the bale chamber. With the CropCutter™ system engaged, bale density is increased and silage quality improved.
No escape, easy clearing
The design of the rotor lobes and knives prevents uncut crop entering the bale chamber and a “knife out” indicator warns the operator should a knife not be in the cutting position. A uniform cut ensures quality silage and ease of distribution. A hydraulic rotor reverser kit allows clearing a rotor blockage from the tractor seat.
Maintaining a high field output
The high clutch torque setting on the main driveline significantly reduces blockages and improves the feeding regularity. This adds to the high daily output. The use of separate tensioners for the main apron chain, eliminates the need to reposition the tailgate shaft. The standard central oiling system on the rotor models also lubricates the main Roll-Bar apron chain.  TWINE, NET OR PLASTIC
Sure wrapping
A positive start for the wrapping process is ensured by the unique duckbill assembly. This simple construction takes net, twine or plastic and introduces it into the bale chamber. The wrapping material is then guided onto the bale surface and pulled around the finished bale as it rotates More than wrapping
The Bale Command Plus™ system provides information about major baler functions and controls the major settings. For example: bale chamber filling left/right, near full bale warning, status of the wrapping control actuator, bale ready for ejection, status of the CropCutter™ control system, total bale count, field bale count, twine bale count, net bale count, cut bale count, the list is extensive and goes on.  Bale shape indication
For optimum bale shape and density even when operating in irregular windrows, the Bale Command Plus™ system provides a bar graph indication of the bale chamber filling. For equal filling, the operator can guide the baler according to the information displayed on bar graph.
More than a full day's baling
The standard baler carries three rolls of net (one active and two stored). Increased bale protection
For outside storage of straw bales New Holland Roll-Bar balers can work with full width plastic film. For silage baling the additional plastic layers protect the crop and can help improve silage quality.
|
